background image

OPERATING INSTRUCTIONS

SPEAkER SySTEm

SR-F09

SR-L09

SR-L05

Thank you for purchasing TOA’s Speaker System. 

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

1. SAFETy PRECAUTIONS

  ............................................................................. 2

2. GENERAL DESCRIPTION

  .......................................................................... 3

3. FEATURES

  ............................................................................................................ 3

4. DImENSIONAL DIAGRAmS

  ...................................................................... 4

5. WIRING DIAGRAmS

  ....................................................................................... 4

6. INPUT CONNECTORS

  .................................................................................. 5

7. CONNECTIONS

  .................................................................................................. 5

8. FLyING (SR-F09 ONLy)

  ............................................................................... 6

9. SPEAkER STAND FOR SR-F09

  ............................................................. 6

10. ChANGE FROm SINGLE- TO BI-AmPLIFIER DRIvE

  ............ 8

11. DIGITAL PROCESSOR SETTINGS

  .................................................. 11

12. SPECIFICATIONS

  ........................................................................................ 12

Summary of Contents for SR-F09













Reviews: