manualshive.com logo in svg

Sony D8 Digital Handycam DCR-TRV820E, Service Manual, Page: 162 / 233

Share
Download
Sony D8 Digital Handycam DCR-TRV820E Service Manual Download Page 162

5-33

8. White Balance Adjustment (PD-118 board)

Correct the white balance.
If deviated, the LCD screen color cannot be reproduced.

Mode

Camera

Subject

Arbitrary

Measurement Point

Check on LCD display

Measuring Instrument

Adjustment Page

D

Adjustment Address

A8, A9

Specified Value

The LCD screen should not be
colored.

Note 1:

Check the white balance only when replacing the fol-
lowing parts. If necessary, adjust them.

1. LCD panel
2. Light induction plate
3. IC5501

Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: A8 and A9, and set the data to the

initial value.

Note:

To write in the non-volatile memory (EEPROM), press
the PAUSE button of the adjustment remote commander
each time to set the data.

3) Check that the LCD screen is not colored. If colored, change

the data of page: D, address: A8 and A9 so that the LCD screen
is not colored.

Note:

 To write in the non-volatile memory (EEPROM), press

the PAUSE button of the adjustment remote commander
each time to set the data.

4) Select page: 0, address: 01, and set data: 00.

Address

A8

A9

Data

80

80

Summary of Contents for D8 Digital Handycam DCR-TRV820E










































































































































































































































Reviews:

No comments