79
Appendix
26
01
PARAMETER NOT SUPPORTED
Detected that an improper page code was
issued by the initiator.
ILLEGAL
REQUEST
26
02
PARAMETER VALUE INVALID
Detected that an improper parameter code was
issued by the initiator.
ILLEGAL
REQUEST
29
00
POWER ON, RESET, OR BUS DEVICE
RESET OCCURRED
The library has been reset by turning on the
power or by the initiator.
UNIT
ATTENTION
2A
90
CARTRIDGE POSITION CHANGE BY PANEL
OPERATION
The state of cartridges may have been
changed due to a panel control.
UNIT
ATTENTION
The cartridge information may be
inconsistent.
Perform the CTG INVENTORY operation.
3B
0D
MEDIUM DESTINATION ELEMENT FULL
Detected that an element with other cartridges
was specified on the target element.
ILLEGAL
REQUEST
Cartridges are set on the target element
(destination). Make sure the cartridge
information and issue a right command.
3B
0E
MEDIUM SOURCE ELEMENT EMPTY
Detected that an element without cartridges
was specified on the source element.
ILLEGAL
REQUEST
There is no cartridge on the source
element (start). Make sure the cartridge
information and then issue a right
command.
43
00
MESSAGE ERROR
An improper message was sent from the
initiator and a command has been interrupted.
ABORTED
COMMAND
A SCSI error occurs.
Check the terminator and SCSI cable.
44
00
INTERNAL TARGET FAILURE
(INCLUDING DRIVE ACI ERROR)
An abnormal internal communication has been
detected with the target.
HARDWARE
ERROR
A SCSI error occurred.
Check the terminator and SCSI cable.
45
00
SELECT OR RESELECT FAILURE
Could not specify the initiator again in the
reselection process.
HARDWARE
ERROR
A SCSI error occurred.
Check the terminator and SCSI cable.
47
00
SCSI PARITY ERROR
A parity error on the SCSI bus has been
detected.
ABORTED
COMMAND
A SCSI error occurred.
Check the terminator and SCSI cable.
4A
00
COMMAND PHASE ERROR
An error occurred in the command phase.
ABORTED
COMMAND
A SCSI error occurred.
Check the terminator and SCSI cable.
4B
00
DATA PHASE ERROR
An error occurred in the data phase.
ABORTED
COMMAND
A SCSI error occurred.
Check the terminator and SCSI cable.
53
00
MEDIA LOAD OR UNLOAD ERROR
Insertion/ejection of media to/from the drive
failed.
HARDWARE
ERROR
Contact the Service and Support Center.
5A
01
OPERATOR MEDIUM REMOVAL
REQUESTED
The cartridge has not been removed from the
import/export element.
ABORTED
COMMAND
The cartridge has not been taken out
from the import/export slot.
Take it out from the slot.
5A
80
OPERATOR MEDIUM INSERT REQUESTED
No cartridge has been inserted in the import/
export element.
ABORTED
COMMAND
No cartridge has been inserted in the
import/export slot.
Issue the command again to insert a
cartridge into the slot.
5A
81
OPERATOR MEDIUM RE-INSERT
REQUESTED
A cartridge has been inserted upside down into
the import/export element.
ABORTED
COMMAND
The cartridge was inserted upside down
or may not have been pushed into the
right position.
Issue an insertion command and then
insert a cartridge correctly into the
import/export slot.
ERROR CODE
DESCRIPTION
SENSE KEY
To Recover
ASC
ASCQ
