![background image](http://html.mh-extra.com/html/sony/cmt-px333/cmt-px333_operating-instructions-manual_420429038.webp)
38
7
Press
.
or
>
on the remote to
select the desired sound source.
The indication changes as follows:
t
TUNER
y
MD PLAY
T
t
CD PLAY
T
8
Press ENTER/YES on the remote.
The start time, the stop time, and the sound
source and volume appear in turn, before
the original display returns.
9
Press
?/1
to turn off the system.
To
Do this
Press CLOCK/TIMER
SELECT on the remote, then
press
.
or
>
on the
remote until “DAILY
SELECT?” appears. Then,
press ENTER/YES on the
remote.
Change the setting
Start over from step 1.
Cancel the timer
Press CLOCK/TIMER
SELECT on the remote, then
press
.
or
>
on the
remote until “TIMER OFF?”
appears. Then, press ENTER/
YES on the remote.
Notes
• If the system is on about 30 seconds before the
preset time, the Daily Timer will not be activated.
• Do not operate the system from the time the system
turns on until the play starts (about 30 seconds
before the preset time).
• When you use the Daily Timer at the same time as
the Sleep Timer, the Sleep Timer setting has
priority.
• You cannot use the components connected to the
DIGITAL OPTICAL IN jack as the sound source
for Daily Timer.
Waking up to music
— Daily Timer
You can wake up to music at a preset time.
Make sure you have set the clock (see “Setting
the time” on page 7).
1
Prepare the sound source you want to
play.
• CD: Place a CD. To start from a
specific track, make a programme (see
“Programming CD tracks” on page 10).
• MD: Insert an MD. To start from a
specific track, make a programme (see
“Programming MD tracks” on page 14).
• Radio: Tune in a station (see
“Listening to the radio” on page 35).
2
Press or – to adjust the
volume.
3
Press CLOCK/TIMER SET on the
remote.
4
Press
.
or
>
on the remote
repeatedly until “DAILY SET?” appears,
then press ENTER/YES on the remote.
The hour indication flashes.
5
Set the time to start playing.
Press
.
or
>
on the remote to set the
hour, then press ENTER/YES on the
remote.
The minute indication flashes.
Press
.
or
>
on the remote to set the
minute, then press ENTER/YES on the
remote.
6
Set the time to stop playing following
the procedure in step 5.
Activate/Check the
setting