![background image](http://html.mh-extra.com/html/sony/cmt-px333/cmt-px333_operating-instructions-manual_420429048.webp)
48
Messages
One of the following messages may appear or
flash in the display during operation.
MD
Auto Cut
The MD deck is pausing the recording because
silence continued for 30 seconds or more during
recording.
Blank Disc
The inserted recordable MD is new, or all tracks on
the MD have been erased.
Cannot Edit
• A pre-mastered MD is in the deck.
• You tried to edit in Programme or Shuffle Play
mode.
• You tried to change the recorded level of a track
recorded in LP2 or LP4 mode.
Cannot REC
• A pre-mastered MD is in the deck.
• The function is switched to MD.
• You tried to change the recorded level of a track
recorded in LP2 or LP4 mode.
Complete!
The editing operation of MDs is completed.
Disc Full!
There is no time remaining on the MD.
Eject
The MD deck is ejecting the MD.
Impossible
• You tried to make an impossible editing
operation.
• You cannot combine or erase the tracks due to
the system limitations of MDs.
• You cannot specify the division point at the
beginning or end of a track.
C41/Cannot Copy
The sound source is a copy of a commercially
available music software, or you tried to record a
CD-R (Recordable CD).
c
The Serial Copy Management System prevents
making a digital copy (see page 44). You cannot
record a CD-R.
C71/Check OPT-IN
This appears momentarily because of the signal of
the digital broadcast during recording.
c
There is no affect on the recorded contents.
No component is connected to the DIGITAL
OPTICAL IN jack, or a digital component is not
connected properly.
c
Connect a digital component to the DIGITAL
OPTICAL IN jack properly using a digital
connecting cable.
The connected digital component is not turned on.
c
See the operating instructions supplied with the
connected component and confirm whether the
component is turned on.
The digital connecting cable connected to the
DIGITAL OPTICAL IN jack is pulled out, or the
connected digital component is turned off during
digital recording.
c
Connect the cable, or turn on the digital
component.
E0001/MEMORY NG
There is an error in the internal data that the system
needs in order to operate.
c
Consult your nearest Sony dealer.
E0101/LASER NG
There is a problem with the optical pickup.
c
The optical pickup may have failed. Consult your
nearest Sony dealer.
Self-diagnosis display (continued)