![background image](http://html.mh-extra.com/html/sony/cmt-px333/cmt-px333_operating-instructions-manual_420429049.webp)
49
Additional Information
Incomplete!
The S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) operation was not
performed properly because the deck was moved
while recording was in progress or the MD is
damaged or dirty.
Initialize (flashing)
The Setup Menu settings have been lost.
Or the contents recorded by the timer have
disappeared over time and are not be available for
saving to disc, or Programme Play could not be
activated since the programme has disappeared
over time.
(The message flashes for about four seconds when
you turn on the deck by pressing
?/1
.)
Name Full
There is no more space to store track or disc titles.
No Change
While attempting to change the recording level
after recording, you pressed ENTER/YES on the
remote without actually changing the recording
level, so no change was made.
No Disc
There is no disc in the MD deck.
No Name
You tried to show the title of a non-labelled disc or
track.
—OVER—
You have reached the end of the MD while
pressing
M
for the MD during playing pause.
Step Full!
You tried to programme 26 or more tracks (steps).
Push STOP!
You pressed PLAY MODE during play.
—Rehearsal—
The MD is playing the specified dividing point for
confirmation during the Divide function.
S.F Edit!
You attempted to perform another operation while
in S.F Edit (changing the recording level after
recording, Fade-in, Fade-out) mode.
S.F Edit NOW
You pressed
?/1
while in S.F Edit (changing the
recording level after recording, Fade-in, Fade-out)
mode.
Smart Space
The signal was input again after silence continued
for 3 or more but less than 30 seconds during
digital recording.
Text Protect
There is CD TEXT information which cannot be
recorded on the MD.
TOC Reading
The MD deck is reading the TOC information of
the MD.
TOC Writing
The MD deck is writing the information of
recorded or edited contents.
Track End
You have reached the end of the track while
adjusting the dividing point during the Divide
function.
continued