![background image](http://html.mh-extra.com/html/sony/cmt-px333/cmt-px333_operating-instructions-manual_420429017.webp)
17
MD
–
Recording
Recording a CD on an MD
— CD-MD Synchro Recording
In addition to normal-speed recording, you can
also record at high speed (approximately four
times the normal speed).
1
Load a recordable MD.
2
Load a CD you want to record.
3
Press CD SYNC NORMAL.
To record at high speed, press CD SYNC
HIGH.
“MD New” and the remaining recordable
time on the MD appear alternately.
4
Press MD
NX
(or
X
on the remote).
Recording starts. You cannot monitor the
recorded signal during high-speed
recording.
If “Retry” flashes in the display after
you press MD
NX
(or
X
on the
remote) in step 4
A reading failure has occurred, and the system
is trying to read the data again.
• If the retry was successful, the system
continues with High-Speed CD-MD Synchro
Recording.
• If the condition of the inserted CD or the
system is poor, and retry fails, High-Speed
CD-MD Synchro Recording is disabled. In
this case, “NORM” flashes in the display and
the MD deck automatically starts recording
in normal CD-MD Synchro Recording. Note
that monitoring of the recorded signal is not
possible when this occurs.
To record on an MD for a long time
(MDLP recording)
See “Recording tips” on page 20.
To stop recording
Press
x
for the MD.
Tips
• Depending on the disc, CD TEXT information may
also be recorded. If “TEXT” flashes during
recording, see “Labelling an MD” on page 25.
• You can record only your favourite CD tracks with
Programme Play. After step 2, follow the same
procedures as step 1 to 5 in “Programming CD
tracks” on page 10. Then, go to step 3.
Notes
• You cannot pause recording during CD-MD
Synchro Recording and High-Speed CD-MD
Synchro Recording.
• If the play mode is set to Repeat Play or Shuffle
Play, it automatically switches to normal play at
step 3.
• The following items are either inoperative or cannot
be used during High-Speed CD-MD Synchro
Recording:
— The Auto Cut Function
— The recording level specified in the Setup menu
• If the MD becomes full during recording, the CD
player and the MD deck stop automatically.