![background image](http://html.mh-extra.com/html/sony/cmt-px333/cmt-px333_operating-instructions-manual_420429014.webp)
14
Other Operations
To
Do this
Find a point in
a track
Keep pressing
m
or
M
for the
MD during play and release it at
the desired point.
Stop play
Press
x
for the MD.
Pause
Press MD
NX
(or
X
on the
remote). Press again to resume
play.
Press
.
or
>
for the MD.
Select a track
Remove the MD
Play repeatedly
(Repeat Play)
Press REPEAT during play until
“REPEAT” or “REPEAT 1”
appears.
REPEAT: For all the tracks on the
MD up to five times.
REPEAT 1: For a single track
only.
To cancel playing repeatedly, press
REPEAT until “REPEAT” or
“REPEAT 1” disappears.
Tip
You can also select the desired track using the
remote.
Press the number buttons. The playback automatically
starts.
To enter track number over 10
(on the remote only)
1
Press >10 (Press twice to enter 100 or
over).
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To enter track number 30, press >10, then 3 and 10/
0.
• To enter track number 108, press >10 twice, then 1,
10/0 and 8.
Note
The play mode cannot be changed while playing a
disc.
Press
Z
MD.
Programming MD tracks
— Programme Play
You can make a programme of up to 25 tracks.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE repeatedly until
“PROGRAM” appears in stop mode.
3
Press
.
or
>
for the MD until the
desired track appears.
Last programmed
track number
Total playing time
Selected
track number
Playing time of the
selected track
4
Press ENTER/YES on the remote.
The track is programmed.
“Step” appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time
of the programme.
Playing an MD (continued)