9
GB
Inserting the Battery Pack
1
Unwrap the Battery Pack.
2
Press the Battery Pack firmly into place
and check that it snaps closed.
To remove the Battery Pack
First power off and wait until the display goes blank. Press the Battery
Release Switch down and remove the battery.
Warning
If the battery is removed from the phone for approx. 10 minutes, the clock will be
reset.
Charging the Battery Pack
As supplied, your battery pack will not be fully charged.
1
Plug the Charger into a mains socket.
2
Plug the Charger into the bottom
(jack) of your phone.
The status bar in the battery icon on the display indicates the
charging status. Charging (0
°
C - 45
°
C) is complete when the battery icon
indicates all bars. Full charging can take up to approximately 3 hours, but
may vary depending on certain conditions e.g. if your phone is switched
on, temperature is outside the operating range. As an energy-saving
measure, disconnect the charger from the mains socket and from the
phone after charging.
Important
Use only the Sony-specified CMD-CD5 battery pack and charger. Your battery is
equipped with short circuit protection. If you shorten your battery accidentally,
charge the battery shortly to unlock the short circuit protection.
Usage Time
When your battery pack is weak, the battery icon in the display flashes
and there is a beep indicating that only approximately one minute of talk-
time is left.
Getting
Started
To mains
Summary of Contents for CMD-CD5
