Sony CMD-CD5, Operating Instructions Manual

Page: 58 / 71

58 GB
The menu allows easy use of most network functions. However, your
Network Operator may advise users of all phones to use standard code
commands, which can also be used with your phone.
Teleservice Setting
You can specify the type of carrier service you want your function setting
to apply to. If no teleservice code is entered, all services except Line 2 will
be affected. The possible values for this option are:
All Teleservices: 10, Speech: 11, SMS: 16, All except SMS: 19, Line 2 (ALS):
89
Call Waiting
Activate call waiting 43
Deactivate call waiting 43
Call Hold Service
The following procedures may be available during a call. The
availability of service depends on your network operator.
Reject 0
Drop 1
Release a specific call X 1X
Swap 2
Place all active calls on hold except call X with 2X
which communication shall be supported
Place all active calls on hold and set up a new call to Directory Number
the specified Directory Number
Release all calls
Multiparty 3
Note
“X” is the number (starting from 1) of the call in sequential order of setting up or
receiving the calls.
GSM Control Codes