HCD-GZR5D
23
SECTION 4
TEST MODE
[COLD RESET]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Press the [
?/1
] button to turn on the system.
2. Press [DSGX] button, [DISC 1] button and [
?/1
] button
simultaneously.
3. The message “RESET” appears on the LCD display. Then,
the LCD display becomes blank for a while, and the system is
reset.
[PANEL TEST MODE]
• This mode is used to check the LCD display, LEDs,
keys, VOLUME jog and OPERATION DIAL jog, model,
destination, software version and VACS level.
Procedure:
1. Press
[
x
] button, [DISPLAY] button and [
X
] button
simultaneously.
2. All LEDs and segments in LCD display are lighted up. All
LEDs are lighted up.
3. When you want to enter to the software version dispaly mode,
press [FUNCTION] button. The model information appears
on the
fl
uorescent indicator tube. “G0012B0108” is shown.
Press [FUNCTION] button again to view the information.
4. Each time [DSGX] button is pressed, the display changes
from the destination information display.
5. To release from this mode, press [
x
] button, [DISPLAY]
button and [
X
] button simultaneously.
[DVD SHIP MODE]
• This mode can run the DVD sled motor optionally. Use this
mode, for instance, when cleaning the optical pick-up.
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select DVD function.
3. Press two buttons of [
N
] and [
?/1
] simultaneously.
4. Set to the DVD ship mode. (chucking on)
5. After blink “STANDBY”, “LOCK” is displayed, disconnect
the AC plug.
[DVD SHIP AND COLD RESET]
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select DVD function.
3. Press three buttons of [FUNCTION], [DISC 2] and [
?/1
]
simultaneously.
4. After blink “STANDBY”, “RESET” is displayed, disconnect
the AC plug.
[DVD SLOT LOCK]
• This mode is for the antitheft of DVD disc in shop. (not for
transport)
Procedure:
1. Press the [
?/1
] button to turn the power on.
2. Press the [FUNCTION] button to select DVD function.
3. Insert a disc.
4. While pressing the [
x
] button, press the [
Z
] button for more
5 seconds.
5. The message “LOCKED” is displayed and the disc slot is
locked. (Even if exiting from this mode, the disc slot is still
locked)
6. If press the [
Z
] button to eject the disc, the message
“LOCKED” is displayed and can not eject the disc.
7. To release this lock, while pressing the [
x
] button, press the
[
Z
] button for 5 seconds again.
8. The message “UNLOCKED” is displayed and the disc slot is
unlocked.
[DVD COLOR SYSTEM]
• This mode let you change the color system of the video
output from PAL to NTSC or vice-versa. This mode is not
available for Latin American and Russian models.
Procedure:
1. Press
[
?/1
] button to turn on the system.
2. Select
DVD
function.
3. Press
[
?/1
] button again to turn off the system.
4. After pressing the [DISPLAY] button, press [
X
] button
and [
?/1
] button simultaneously. The system will turn on
automatically.
The message “COLOR PAL” or “COLOR NTSC” appears on
the LCD display.
Summary of Contents for CDM74HF-DVBU101
Page 30: ...HCD GZR5D 30 MEMO ...
Page 101: ...MEMO HCD GZR5D 101 ...