4-12
DVS-7000AE IM
4-3. Installation of Options for DVS-7000A
4-3-4. Installation of BKDS-7690 (Redundant Power Supply Unit)
w
To avoid shock hazards, be sure to turn off the breaker at the outside of DVS-7000A or unplug the power
cord when installing BKDS-7690.
Contents
Power unit
: 1pc
Screw (PWH4
x
6) : 4pcs
(1) Detach the front panel of DVS-7000A. (Refer to “4-3-1. Detaching and Attaching of Front Panel”.)
(2) Remove the pre-installed blank panel of BKDS-7690 as shown in the following figure.
(Four screws PWH4
x
6)
(3) Properly insert BKDS-7690 to the pre-install position.
(4) Secure BKDS-7690 to DVS-7000A by the four screws (PWH4
x
6) supplied with BKDS-7690.
(5) Turn on the power switch of BKDS-7690.
PWH4
x
6
PWH4
x
6
PWH4
x
6
BKDS-7690
Blank panel
PWH4
x
6