Sontay SonNet Trend, Technical Manual

Page: 7 / 220

SIP SonNet-Trend - Interface Range
Contents
1 INTRODUCTION ...................................................................................................................................... 1
1.1 THE UNIT 3
1.1.1 Front Panel Annunciation ............................................................................................................... 3
1.1.2 Button and Switches ....................................................................................................................... 4
1.2 SYSTEM OVERVIEW .............................................................................................................................. 5
1.2.1 SonNet Network ............................................................................................................................. 6
1.2.2 Trend Network ................................................................................................................................ 6
2 HARDWARE GUIDE ................................................................................................................................ 7
3 INSTALLATION GUIDE ........................................................................................................................... 9
5 Issue 1, Jun. 2014
Remember Typically, individual systems (energy control, lighting, boiler and air conditioning
system, etc.) are individually measured for CO2 accountability. So, installing this
unit and combining the individual systems can help an effective BMS be more
energy efficient and comply with April 2006 Part L2 Building Regulations.
This product exposes information from
SonNet ‘ End devices ’ via its connection to a single
SonNet RF-RXS wireless receiver to the Trend BMS. Selected data, e.g. Amps, Voltage or
Temperature, from battery or permanently powered ‘
End devices ’ can be retrieved, logged (‘
Map
points
’ page), and presented (‘
vIQ
’ configuration pages’) allowing building managers prevent
outages, optimise the energy distribution and maintain building systems before any serious
problem occurs.
Each unit variant determines the maximum number of connected
SonNet ‘ End devices ’,
including a default of 20
points per ‘ End device ’ (see
Error! Not a valid bookmark self-
reference. ).
It is designed and manufactured to comply with CE Class A, FCC Class A, WEEE (Waste
Electrical and Electronic Equipment), RoHS (Restriction of Hazardous Substances) regulations
and the identification of a substance as Substance of Very High Concern (REACH).