Sontay SonNet Trend, Technical Manual

Page: 180 / 220

SIP SonNet-Trend - Interface Range
Contents
1 INTRODUCTION ...................................................................................................................................... 1
1.1 THE UNIT 3
1.1.1 Front Panel Annunciation ............................................................................................................... 3
1.1.2 Button and Switches ....................................................................................................................... 4
1.2 SYSTEM OVERVIEW .............................................................................................................................. 5
1.2.1 SonNet Network ............................................................................................................................. 6
1.2.2 Trend Network ................................................................................................................................ 6
2 HARDWARE GUIDE ................................................................................................................................ 7
55 Issue 1, Jun. 2014
if the ‘
Status
’ and the ‘
Required Status
’ are the same.
Tip!
Press ‘Copy/paste data’ button to display a dialog. Use ‘Copy to clipboard’ to add
all the module information (excluding Status) to the computer clipboard, or click
the right hand mouse button in the white square and select ‘Paste’ from the
context menu to add copied information to the Module page. Module information
can be edited using .CSV editing software, e.g. Microsoft Excel.
51.
Press
‘
Save
’ to confirm Trend ‘
Digital Inputs
’ Module changes.
15.2.14
Configure a Knobs Module
The ‘
Knobs
’ page displays read and write Integer values in the specified engineering units
recorded by the parameter in the corresponding third party device. The parameters on this page
are used to configure the authorisation level required to inspect and/or control a specified Knob
Module value within the defined limits.
Device Parameter
Identification
Shows
Recorded Value
Engineering
Data Unit
Upper and
Lower Limit
Access
Level