Sontay SonNet Trend, Technical Manual

Page: 205 / 220

SIP SonNet-Trend - Interface Range
Contents
1 INTRODUCTION ...................................................................................................................................... 1
1.1 THE UNIT 3
1.1.1 Front Panel Annunciation ............................................................................................................... 3
1.1.2 Button and Switches ....................................................................................................................... 4
1.2 SYSTEM OVERVIEW .............................................................................................................................. 5
1.2.1 SonNet Network ............................................................................................................................. 6
1.2.2 Trend Network ................................................................................................................................ 6
2 HARDWARE GUIDE ................................................................................................................................ 7
80 Issue 1, Jun. 2014
15.3.4
Replicate an Existing vIQ Calculation
Sometimes, an existing vIQ Calculation will perform a sequence of mathematical operations that
are also applicable or similar to the requirements of other vIQ Calculations. By selecting a
calculation record and replicating the associated vIQ Calculation, the corresponding sequence of
mathematical operations can be automatically assigned to a defined out-station and module in
each vIQ Calculation.
Example This shows the automatic configuration of out-station numbers when replicating
an existing vIQ Calculation. This can also apply to module numbers.
1
2
2
2
Note The S(I, K, or W) n number will be
adjusted, if ‘Module numbers’ is
selected in ‘Changing’.
Existing vIQ Calculation
First Replicated vIQ Calculation
Second Replicated vIQ Calculation
3
3
3