Sontay SonNet Trend, Technical Manual

Page: 208 / 220

SIP SonNet-Trend - Interface Range
Contents
1 INTRODUCTION ...................................................................................................................................... 1
1.1 THE UNIT 3
1.1.1 Front Panel Annunciation ............................................................................................................... 3
1.1.2 Button and Switches ....................................................................................................................... 4
1.2 SYSTEM OVERVIEW .............................................................................................................................. 5
1.2.1 SonNet Network ............................................................................................................................. 6
1.2.2 Trend Network ................................................................................................................................ 6
2 HARDWARE GUIDE ................................................................................................................................ 7
83 Issue 1, Jun. 2014
Enter a value in ‘
Adding
’. This determines the offset for the numerical references
defined in ‘
Changing
’ when the selected calculation record is replicated, i.e. if this value
is ‘2’ and ‘OS numbers’ is selected, all numerical out-station references in each vIQ
Calculation are offset by the ‘2’.
Tip! Enter a minus (-
) number in ‘Adding’ to decrease the ‘OS numbers’ or ‘Module
numbers’ defined in ‘Changing’.
xli.
Press
‘
Replicate
’ to create the requested number of calculations.

If necessary, change the time period between performing each vIQ Calculation (see
Configure the ‘Frequency’ schedule
).
66.
Press
‘
Save
’ to confirm vIQ Calculation changes.