Sonnet Crescendo G3 NuBus Installation Manual Download Page 73 | Manualshive

Page: 73 / 97

background image

67

This chapter contains instructions for installing Crescendo NuBus
processor upgrade cards into Radius System and 81/110 computers.

System Compatibility

At this printing, Crescendo NuBus processor upgrade cards are
compatible with the latest Mac OS from Apple. Mac OS 9 is required
for G4 AltiVec use. For up-to-date Mac OS compatibility, check
our website.

You Should Have

The following items should be included in your product package:
• Crescendo NuBus processor upgrade card
• Crescendo/Encore Install diskette
• Installation manual
• Powered by Sonnet label

Installation Overview

This overview is intended for those with prior experience installing
Sonnet upgrade products or Macintosh hardware. However, we
strongly recommend following the full installation instructions if
this is your first installation of this hardware.

Installing the Crescendo card takes a few easy steps:

1)

Install Mac OS 9 (if upgrading as part of this installation)

2)

Install Sonnet software

3)

Turn off computer

4)

Remove case cover from computer

5)

Remove power supply brace above NuBus and PDS slots

6)

If installed, remove PDS card from PDS slot

7)

Remove Level 2 cache card (if present)

8)

Install Crescendo card into PDS slot

9)

Replace power supply brace

10)

Replace case cover onto computer

11)

Affix the Powered by Sonnet label to front of computer

12)

To upgrade to AltiVec-enhanced software, see Chapter 8

For more complete instructions, follow the installation procedure
outlined in the pages that follow.

Radius System 100 and 81/110 Installation

7

«
...
71
72
73
74
75
...
»

Summary of Contents for Crescendo G3 NuBus


































































































Reviews:

No comments

Related manuals for Crescendo G3 NuBus

Brand: Paradyne Pages: 2

Brand: X-Micro Pages: 9

Brand: X-Micro Pages: 19

Brand: Falcon Pages: 24

Brand: UfiSpace Pages: 35

Brand: Point of View Pages: 13

Turbo NAS TVS-71 Series

Brand: QNAP Pages: 51

Brand: Longshine Pages: 35

Brand: Air Live Pages: 2

Brand: ENERMAX Pages: 33

ExtremeCloud Appliance E1120

Brand: Extreme Networks Pages: 219

Brand: Intel Pages: 51

MEITRACK MVT380

Brand: Shenzhen Pages: 8

Brand: Hitachi Pages: 138

H8/3670F-ZTAT HD64F3670

Brand: Hitachi Pages: 305

Brand: Hitachi Pages: 463

UTOPIA R32 Series

Brand: Hitachi Pages: 51

SuperStack II 3C16971

Brand: 3Com Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands