33
Power Macintosh 7100 Installation
Attach Video Flex Cable
1.
Attach the connector on the video flex cable to the AV or HPV card
(Figure 24)
. Gently press down on the outer edges of the connector
to avoid pricking your fingers on the series of pins on top of the
connector. If necessary, use a piece of foam from the packaging
material your card shipped in to provide a cushion between your
finger and the pins.
2.
Return the computer to your computing area.
3. IMPORTANT!
– Before replacing the cover onto your computer,
attach your monitor’s video cable to the AV or HPV card 15-pin
monitor connector
(Figure 25)
. Secure the cable by tightening the
thumbscrews on the cable’s connector. Connecting the cable anchors
the card in place while replacing the cover.
attach connector
Figure 24: Attach video flex cable to AV or HPV card
Figure 25: Reattach 15-pin monitor connector
15-pin monitor connector
