42
Install Crescendo NuBus Processor Upgrade Card
Remove the Crescendo card from the anti-static package, making sure to
handle the card by the edges
(Figure 5)
. Your card may differ from what is
pictured below.
•
If You Are Re-Installing an AV or HPV Card –
Temporarily set the
Crescendo card aside and continue with the instructions on the
following page to install the Crescendo with an AV or HPV card.
•
If You Do Not Have an AV or HPV Card –
Align the Crescendo
card over the PDS slot on the logic board with the card’s heatsink
facing away from the NuBus slots
(Figure 6)
. Gently press down until
the card is firmly seated in the PDS slot. Replace the cover onto your
computer and finish the installation in the section entitled, “Reconnect
Power and Peripheral Cables” on page 53.
Chapter 4
Figure 6: Install Crescendo card into PDS slot
Crescendo card
PDS slot
Figure 5: Remove Crescendo card from packaging
NuBus slots
