47
Power Macintosh 8100, 8115, and Workgroup Server 8150 Installation
Affix AV Card to Video Adapter Board
1.
Before attaching the AV card to the video adapter board, you need to
bend the metal tab 90° at the end of the card with a small flatblade
screwdriver
(Figure 14)
so it fits in its new location.
2.
Using a small Phillips screwdriver, remove the three standoffs from
the video adapter board. Locate the two subassembly standoffs
from the video adapter packaging. Assemble and secure the two
subassembly standoffs to the upper left and right corners of the
adapter board
(Figure 15)
.
Figure 15: Assemble and secure subassembly standoffs as shown
bend tab from original position here
90°
angle
Figure 14: Bend back metal tab on AV card
to here
subassembly
standoff
subassembly
standoff
