Electrical Installation
6
6.4 Connecting the Ethernet line
►
Use a patch cable with the following properties as the Ethernet cable:
•
the Patch cable is Cat 6,
•
the Patch cable is shielded.
►
Connect the patch cable (1) as it is shown in the following figure.
►
Connect the other end of the Ethernet cable to the router of the home
network (2).
1
2
XS03
Figure 26: Connecting the Ethernet line
1
Patch cable (not included in scope of delivery)
2
Home network router
XSO3 Ethernet port
Upon commissioning, the storage system automatically establishes the connection
to the internet once the patch cable has been correctly connected.
If the connection to the internet is not automatically established after
commissioning:
►
Follow the instructions in section 9 (see p. 63).
KD-421 | Part no. 22136 | EN | X03
33 / 68