Sonic SCS-60, Operation Manual

Page: 41 / 94

5-9
II. Menu for setting a fixed value
Each time the menu key ( ) is pressed, the setting number will go up one-by-one
(Set 1 → Set 2).
Each time the menu back key ( ) is pressed, the setting number will go
down-by-
one (Set 2 → Set 1).
(1)
The setting details of "NET CAST" are described in 5. 3. 1. NET CAST .
(2)
The setting details of "NET SET" are described in 5. 3. 2. NET SET .
(3)
The setting details of "VRM" are described in 5. 3. 3.VRM .
Preset menu Set 1 Set 2 Set 3 Set 4 Set 5 Set 6 Set 10
TM/RM RM/HU RM/NU TM/CU
NET CAST
(1)
NET SET
(2)
VRM
(3)
DISCRIM DISCRMI 1 DISCRIM 2
DISCRMI
3
DISCRM 4 DISCRMI 5 DISCRIM 6
DISCRIM
10
PP FILTER
PP
FILTER 1
PP
FILTER 2
PP
FILTER 3
PP
FILTER 4
PP
FILTER 5
PP
FILTER 6
PP FILTER
10
TX POWER Any value from 0 to 10 can be set.
TX PULSE Any value from 1 to 10 can be set.
TX SYNCRO INTERNAL EXTERNAL
TX CYCLE Any value from 40 to 800 can be set.
SONAR AREA
FULL
SCREEN
HORIZONTAL MULTI
ECHO
SOUNDER
AUDIO
SUB AREA 1 NON EVENT
DEPTH/
WIND
SHORTCUT1
SUB AREA 2 NON EVENT
DEPTH/
WIND
SHORTCUT2
SUB AREA 3 NON
NET
INFO
EVENT
SUB AREA 4 NON
TEMP
GRAPH
FISH
GRAPH
CURRENT
GRAPH
EVENT TILT
TILT MODE MANUAL AUTO
ONE
SHOT
TRACK
AUTO TILT 2° 5° 10°
AUDIO VOL Any value from 0 to 10 can be set.
RCBRTNESS
BACK
Any value from 1 to 10 can be set.
RCBRTNESS
KEY
Any value from 1 to 10 can be set.
WAKE RESET The wake is reset each time the event key is pressed.
TX BEAM
WIDTH
MAX
NARROW
NARROW WIDE MAX WIDE
Each time you press the menu key, the setting number goes up.
Each time you press the menu back key, the setting number goes down.