Sonic KCS-3500, Operation Manual

Page: 56 / 102

6-14
【
How to Change the Auto Tilt Mode
】
(1) Press the key to open the menu.
(2) Place the cross cursor over the “SUB SCREEN” and press the key to open the
“SUB SCREEN” menu.
(3) Place the cross cursor over the “TILT” and press the key to open the “TILT”
menu.
(4) Place the cross cursor over the “AUTO TILT” and press the key to open the
“AUTO TILT” menu.
(5) Place the cross cursor over a tilt set item to be used, and press the key to
change the auto tilt mode.
TILT SELECT Description
MANUAL This is for setting the tilt manually.
AUTO
This is for changing the tilt automatically each time the
transmission is performed. This is also for changing an angle set
by
the auto tilt mode each time the transmission is performed.
For example, when the tilt is 0°, and 2° in the auto tilt mode, the
tilt continually changes each time the transmission is performed,
starting from -2°→ -4°→ -2°→ 0°→ +2°→0°.
ONE SHOT
Unlike continual changing in the auto tilt mode, the one shot mode
is for changing only one cycle of the auto set.
For example, when the tilt is 0°, and 2° in the auto tilt mode, the
one shot mode changes only one cycle of the tilt each time the
transmission is performed, starting from -2°→ -4°→ -2°→ 0°→
+2°→0°, and it ends the changing process.
TRACK
This is used with the event mark . This is for automatically
changing the tilt to track the depth of the event mark .
The tilt cannot be changed while tracking.
MENU SUB SCREEN TILT
AUTO TILT