Sonel CMM-40, User Manual

Page: 67 / 112

CMM-40
– USER MANUAL
65

Insert the battery into battery holder, observing the correct po-
larity,

Put the battery cover back in place. Secure with the screws.
Illustration 3. Battery cover of the CMM-40 meter
8 Replacement of the fuses
WARNING:
To avoid electric shock, disconnect the test leads from any
source of voltage before removing the meter cover.
In order to replace the fuses it is necessary to do the following:

Disconnect the test leads from the meter and place rotational
selector in the position OFF,

Remove the b
attery cover (two “B” screws) and the battery,

Remove the six “A” screws securing the rear cover,

Gently remove the old fuse and install the new fuse into the
holder,