Sonel CMM-40, User Manual

Page: 73 / 112

CMM-40
– USER MANUAL
71
h) Crest factor ................................................................ ≤3 at full scale up to 500V
...........................................................................decreasing linearly to ≤1,5 at 1000V
i) PEAK ............................................................................... captures peaks >1ms
j) Measurements rate.................................................2 times per second, nominal
k) Input impedance .......................................................>10MΩ VDC & >9MΩ VAC
l) Display .....................................40,000 count backlit liquid crystal with bargraph
m) Store capacitance ........................................................................................ 2000
n) Size .......................................................................................... 187 x 81 x 55mm
o) Weight (includes holster) ............................................................................. 342g
p) Fuses ........................................ mA, µA ranges; 0.5A/1000V ceramic fast blow
....................................................................... A range; 10A/1000V ceramic fast blow
q)
Operating temperature ........................................... 0ºC to 40ºC (32ºF to 104ºF)
r) Storage temperature............................................. -20
o
C to 60
o
C (-4
o
F to 140
o
F)
s) Operating humidity .................................................. max 80% up to 31ºC (87ºF)
........................................................ decreasing linearly to 50% at 40ºC (104ºF)
t) Storage humidity ......................................................................................... <80%
u) Max. operating altitude ............................................................... 2000m (7000ft)
v) Auto power OFF ................................ 15 minutes (approx.) with disable feature
w) Enclosure .................................................................. double molded, waterproof
x) Compliance with the requirements specified in the following standards ............
.......................................................................................................... EN 61010-1
.................................................................................................. EN 61010-2-032
y) Quality standard ................................................................................... ISO 9001
12.2 Standard equipment
The standard set provided by the manufacturer includes the fol-
lowing components:

The CMM-40 meter,

Test leads (2 pieces),

9V battery,

K Type temperature probe,

Socets protective plugs (2 szt.),

Operating manual,

Carrying case,

Warranty card.