6
7. Fill the water tank (2) with cold tap water to reach between the MIN mark and MAX mark.
Put the water tank cover (1) back in its place.
8. Plug the unit into a standard grounded wall socket.
9. Switch on the appliance by pressing the on/off button (7).
10. The 3 icons on the appliance display will start to flash and the coffee machine will heat up
to make coffee.
11. After about 1 minute, the 3 icons will illuminate continuously indicating the end of the
heat-up cycle.
12. Place a cup under the outlets.
13. Touch the espresso button (9).
14. After the water has finished dripping, remove the filter holder, rinse the filter with cold
water and repeat the process with the double dose filter.
15. To put the milk frother into use, touch the steam heat-up button. The icon will keep flashing
until the appliance completes heat-up for the steaming, then it will illuminate continuously,
when the correct temperature is reached.
16. Immerse the frothing nozzle in half a glass of water and turn the steam control (3) leftward
to steaming position. Steaming will start and become continuous.
17. Close the steam control, and the steaming pictogram will light up.
18. If you tap on the steaming pictogram now, the two icons on the left (espresso / double
espresso) will start flashing quickly, indicating that the appliance is too hot to make coffee.
When the appliance cools down, the icons will illuminate continuously again. You can
speed up cooling by opening the steam control; this will allow the hot water to escape via
the frothing nozzle.
19. Now the device is ready for use.
CLEANING, MAINTENANCE
1. You can clean the inside of the nozzle immediately after frothing by allowing the steam to
flow into half a glass of water.
2. Before any further cleaning, turn off the appliance and disconnect it from the power supply
by pulling out the plug.
3. Allow the appliance to cool down (min. 20 minutes). Remove the coffee grounds after
every use.
4. Wash the filter, the filter holder, the water tank, the removable milk frothing nozzle, the drip
tray and the grille by hand.
5. Do not put the filter holder back in place until you are about to make coffee. This prevents
the seal from being worn unnecessarily.
6. Carefully clean the frothing nozzle and tube, the tube may still be hot.
7. Clean the outside of the appliance with a slightly damp cloth. Do not use aggressive
cleaning agents! Do not let water leak inside the appliance or spill on electrical components.
Do not immerse the appliance in water.
