5
20. If you notice any irregularities (such as unusual noise from the appliance or burning smell),
switch off and unplug the appliance immediately.
21. Protect from dust, moisture, sunlight and direct heat.
22. Only connect to earthed wall socket with 230V~ / 50Hz rated supply voltage.
23. Do not use an extension cord or splitter to connect the appliance to the mains.
24. Caution! Prevent water from splashing on the mains socket.
25. Never touch the appliance or the power cord with wet hands.
26. To avoid the risk of electric shock, never immerse the appliance, or the mains cord or plug
in water.
27. Keep the appliance in a place, where the power supply plug can be easily reached and
unplugged.
28. The power must not come into contact with hot surfaces.
29. Run the power cord so that it cannot be accidentally disconnected and does hang down
from the table edge.
30. Before relocating or cleaning the appliance, disconnect it by unplugging the mains plug,
and then let it cool down.
31. The heating elements / heated surfaces of the appliance will remain warm for a while after
switching off.
32. If you are not going to use the appliance for an extended period, turn it off and unplug the
power cord. Store in a dry, cool, frost-free place.
33. The product is designed for household, not for industrial use.
Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its
accessories. In case any part is damaged, immediately power off the unit and seek the
assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced
by the manufacturer, its service facility or similarly qualified personnel.
PUTTING INTO USE
1. Before installation, carefully remove packaging, and make sure not to damage the unit or
the power cord. If you find any damage, the unit must not be operated!
2. The appliance is exclusively for use in a dry, indoor environment.
3. Place the unit on its base on a hard, flat surface.
4. When using the appliance, always ensure the minimum positioning clearances shown in
Figure 2
around the product.
5. Wash the filters (17, 18), the filter holder (19) and the water tank (2) thoroughly with
running hot water and using dishwasher detergent, and then rinse them with clean water.
6. When the washed parts are dry, assemble the appliance. Do not put coffee in the filter.
Insert the single dose filter into the filter holder, then snap the filter holder into place with
the handle looking to the left toward the open padlock. Turn it to the right until it stops at
the closed padlock mark, so that the handle looks forward. The edge of the filter holder
should be clean to closely align with the seal on the appliance.
