Somogyi Elektronic home HD T2 Instruction Manual Download Page 8

Page: 8 / 27

- Setting Duration: HH/MM handling similarly, as setting the Date.
23:59 is the maximum time period which can be set.

- Setting Mode: Once, Weekly, Monthly, Yearly, WeekDay

- Setting the Type: On, Record, Channel: switches to the set channel
or turns on the device at the set time, Standby: Switches the device
on or off at the set time.

When you have set all the timer information, you can accept the settings

by pressing the „OK” button, activating the timer this way.

The green LED lights up in the display when the timer is off.

Warning!

In timer recording mode, the remote control functions will not be locked. In
case of a channel change, the unit pauses recording from the set channel, if
you reset the unit with the remote control to the originally set channel during
the preset timing, the unit will continue recording according to the preset

program. The interrupted recording is recorded in separate files.

When the timer recording starts, the receiver will also activate the TV if it

was previously in standby mode.

Parental guide

From the „Setting” menu, select the „Child lock” option, then press the

„OK” button. Enter the security code (the default code is „0000”). After

entering the correct password, the parental control menu will appear.

1. System Lock: The device does not allow broadcasts with age values

specified in the Parental Rating menu. You can turn the lock on/off with

this option.
2. Parental Rating: you can choose between the selection of 0 and 4-18
years age

3. Changing PIN: After entering the old code, enter the new code and

enter the new password again in line Confirm Password. This activates

the new security code.

Setting local time:

From „Setting” menu, select the „Date Time” option, then press „OK” but-
ton.

1. Date Time mode: In case of selecting Auto setting option, the device

displays the date and time specified by your service provider.

2. In case of Manual setting option, you can manually set the date and
time.
3. The Time Zone menu is active only when selecting the Auto setting
option. If you have set time zone manually, the Day Light
Saving menu becomes active, can be switched on/off.

Ethernet settings:

In case of HD T2 devices, this option is not available.

Factory reset:

To activate the factory reset menu, you need to enter the security code

(default code: 0000). After entering the security code, the device will be

reset and the Init Install menu activates. The machine will lose its pre-
vious settings.

Firmware update of the device from USP data storage:

Allows the user to upgrade the software version via USB.

1. Enter the „Setting” menu and select the „Update” menu, then press
the „OK” button
2. Enter the „USB Upgrade” menu and select the program you want to
install from the background storage

Device version information:

The „Version” menu provides information on the hardware, software, fir

mware, date of manufacture and MAC address. Press EXIT to exit the
menu.

Automatic switch off:

In the „Auto Standby” menu, you can schedule the device to switch off
when it is inactive. If no activity is performed before the set time expires,
the remote control will switch off in standby mode. You can set 1-2-3
hours or disable this position.

Setting audio and video features

1. Use the „RIGHT” / „LEFT” buttons to select the „AV setting” option

2. Use the „UP”/ „DOWN” buttons to select the desired element, then

press „OK” button
3. Press the „EXIT” button to exit.

Setting digital audio output:

Selectable options in „SPDIF” menu for setting the coaxial audio output:

- Mute: There is no signal at the audio output
- PCM: two-channel stereo signal at the output
- Bitstream: All audio channels on the output, typically Dolby Digital
or DTS

Setting aspect ratio:

Selectable options in „Aspect Ratio” menu for setting the screen display:

- 16:9
- Full screen

- 4:3 LB (Letter Box)

- 4:3 PS (Pan Scan)

Setting video output:

Selectable options in „Video Output” menu for setting the digital video

output:

- CVBS: turn on composite video signal
- RGB:

Video Resolution setting:

- Auto Detect, 480p_60, 480i_30, 576p_50, 576i_25, 720p_60, 720p_50,
1080i_30, 1080i_25, 1080p_60, 1080p_50

HDMI audio output options:

Selectable options in „HDMI Audio” menu to set the HDMI audio output:

- Mute: There is no signal at the audio output
- HDMI PCM: two-channel stereo signal at the output

- HDMI RAW: All audio channels on the output, typically Dolby Digital

or DTS

Playing media content (image, film, music) from storage, time shift

recording

1. Use the „RIGHT” / „LEFT” buttons to select „Media Center” option
from the bottom row pictograms

2. Use the „UP” / „DOWN” buttons to select the item you want, then

press the OK button.
3. Press the “EXIT” button to exit.

Playing multimedia contents:

If you select „Multimedia” menu, the contents of the device can be pla-

yed on the USB storage. In „Video” menu, you can play the files on the

storage. You can select directories and files on your device with the na

vigational and „OK” buttons. You can play, pause and stop playback with

PLAY/PAUSE/SOP buttons. Supported file formats: MPG, VOB, DAT,

ASF, MKV, RM, WMV, TS, QT

- In the „Music” menu, you can play audio files from the storage. You

can select directories and files on your device using the navigation and

“OK” buttons. You can play, pause and stop the playback of the cont-

ents, using the PLAY/PAUSE/SOP buttons. Recommended file systems:

WMA, WAV, MP3

- In the „Photo” menu, you can play image files on the storage. You

can select directories and files on your device using the navigations

buttons and press the “OK” button to display the desired image file.

Double-pressing the „MENU” button the data of the displayed picture

can be displayed.

- In the “Record Manager” menu, you can play video files recorded on

the digital receiver to the storage. You can select directories and files on

your device using the navigation and “OK” buttons. You can play, pause
and stop the playback of the contents, using the PLAY/PAUSE/SOP
buttons. Use the colored buttons to delete and rename the recordings.

- Use the colored buttons to replace, copy, rename or delete files on the

storage under „Disk Manager” menu.
- In „EBook” menu, you can display E-books

- During playback of all multimedia contents, press the „MENU” button

to activate the „Media Center”/”Multimedia Configuration” menu. This

allows you to select:
- MP4 subtitle language,
- language of the e-book
- the type of movie, music, photo repeat you are playing

• repeat the entire library
• repeat playback of the selected movie or
• switch off repeat

- Background music switched on/off
- In „SlideTime” menu, you can set, how often the displayed photos

change (3-6-9-12-15s)

- In „Effect” menu, you can set the image changing according to the
desired effect.

• Vertical transition

• WindowH

• WipeEdgeToCenter