Installation:
1. Press the „MENU” button on the remote control.
2. Use the „RIGHT” / „LEFT” button to select the „Installation” menu in
the lower pictogram menu bar.
3. Use the „UP” / „DOWN” buttons to select the desired item, then hold
pressed the „OK” button.
4. Press the „EXIT” button on the remote control to exit.
Automatic search:
To select Auto search, press the „DOWN” then the „OK” button.
Manual channel search:
1. Use the navigation buttons to select the Manual Search menu then
press the „OK” button.
2. Use the navigation buttons to set Channel No., the Frequency and
the Bandwidth.
3. After selecting the Start search option, press the „OK” button to start
searching.
Ignore encoded broadcasts:
1. Use the navigation buttons and select the Channel Filter menu, than
press the „OK” button.
2. By selecting the „FTA Only” menu, it only tunes the encoded, open-ac-
cess channels
3. By selecting „All Channels” menu, you tune both coded and open-ac-
cess channels
Selecting region:
Select the „Country” menu to set the region for your location.
Logical channel number:
When the LCN option is switched on, the device will sort the channels ac
-
cording to the channel assignment defined by the service provider. If the
LCN (Logical channel number) option is active, the channel number cannot
be changed.
Antenna power supply:
In „Active Antenna” menu you can select, whether the device is providing
power to the antenna through the antenna connection point. (5 V DC)
USE
Changing channel
There are several ways to select the channel you want to display, by scro-
lling the channels up or down, using the number buttons, or from the the
on-screen channel list.
1. Scroll channels up and down
Use the „UP” and „DOWN” buttons on the remote control to scroll
through the channels on after the other.
2. By channel number:
Use the number buttons on the remote control to enter the channel num-
ber you want to watch.
3. On-screen channel list:
The channel you want to watch can be selected directly from the
on-screen channel list. Press the „OK” button while watching TV to
display the list.
4. On-screen favorite channel list:
It displays the channel list as described in the previous point, then press
the „RIGHT” or „LEFT” buttons on the remote control to scroll through
the set favorite lists.
Setting volume
Use the remote control’s VOL+ and VOL- buttons to set the appropriate
volume on the unit. Too high volume set on the DV-T2 may cause distor-
tion in the TV quality.
Electronic program guide (EPG)
Using the EPG:
1. Press the EPG button to display the „EPG”.
2. Use the remote control’s directional buttons on the remote control to
choose channels and programs. Use the „RIGHT” / „LEFT” buttons to
switch between the TV channel list column and the program list column.
3. Press the „Green” button on the remote control to set a reminder or
recording time for the selected event.
4. Press the „Red” button on the remote control to display the time zone
for easier time selection, toggle between half-day, full-day or weekly
view.
Attention! The information contained in the electronic program gu-
ide is the responsibility of the broadcaster.
CHANNEL EDIT
Channel edit menu
After displaying the main menu, press „RIGHT” / „LEFT” buttons to select
„Channel” menu in the bottom menu.
Customizing the list of the TV/Radio channels:
1. Press the „UP” or „DOWN” buttons and step on „Channel Manager”
menu, hold pressed the „OK” button to enter the menu.
2. The „Channel Manager” menu includes the following options, which
you can activate with the color/other buttons on the remote control:
red: „Lock”, green: „Del”, yellow: „Skip”, blue: „Rename” OK: „Renum-
ber”
To activate the lock function, the device asks for a PIN, the default PIN
is 0000
3. By pressing the TV/Radio button, you can change between the list of
the TV and the Radio channels
4. Press the „EXIT” button to exit.
List of favorites:
1. Press the „UP” or „DOWN” button and scroll to the „Favorite list”
menu, press the „OK” button to enter the menu.
2. Use the colorful buttons on the remote control to select the favorite
group of channels.
3. Press the „EXIT” button to exit editing and save the settings
4. Favorite channel list displayed on screen: Press „OK” button to acti-
vate channel list, then press „RIGHT” or „LEFT” buttons on the remote
control to scroll through the complete list and set favorite list.
SYSTEM SETTING
Default setting
This menu allows you to set the default settings for your device (menu
language, screen display format, etc.)
1. Use the „RIGHT” / „LEFT” buttons to select „Preference” option from
the pictograms in the bottom row.
2. Use the „UP”/ „DOWN” buttons to select the desired item you want,
then press the „OK” button
3. Press the „EXIT” button to exit.
Display language
1. Press the „UP” or „DOWN” buttons and step on the „OSD Language”
menu, press the „OK” button to enter to the menu.
2. Use the „EP” / „DOWN” buttons to scroll through the languages. Press
the „OK” button to activate the selected language
Screen display timing
1. Press the „UP” or „DOWN” button and step on the „OSD Timeout”
menu, press the „OK” button to enter the menu.
2. With „UP” / „DOWN” buttons you can scroll between display periods.
Press the „OK” button to activate the selected time.
Transparency of screen display
1. Press the „UP” or „DOWN” buttons and step on „OSD Transparency”
menu, press the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll between the measures of
transparency. (0%-60%) Press the „OK” button to activate the selected
value
Selecting subtitle language
1. Press the „UP” or „DOWN” button and scroll „1. Preferred Subtitle”
or 2. Preferred Subtitle” menu, press the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll through the available
languages. Press the „OK” button to activate the selected languages.
Hearing loss function: If provided by the broadcaster, switch off / on
subtitles for the selected channel.
Selecting audio language
1. Press the „UP” or „DOWN” button and scroll on „1. Preferred Audio”
or „2. Preferred Audio” menu, press the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll between the selectable lan
-
guages. Press the „OK” button to activate the selected languages.
System setting
This menu item allows you to set the default setting for your device (menu
language, screen display format, etc.).
1. Use the „RIGHT” / „LEFT” buttons to select the „Setting” option
2. Use the „UP”/ „DOWN” buttons to select the desired element, then
press the „OK” button
3. Press the „EXIT” button to exit.
Timing of recordings, reminders
1. Press the „UP” or „DOWN” button and scroll the „Timers” menu, press
the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll through the timer programs
(01-27). Press the „OK” button to activate the selected timer.
- Setting the Date: activate with the „RIGHT” arrow, use the navigation
buttons to change the date. DD/MM/YYYY (allow characters only that
exist in the calendar to be displayed. e.g.: if you want to set 2 and 31
for the second character, you must first set the second character to
1, so that the device will offer 3 as the first character.) Press the „OK”
button to activate the set date.
- Setting the Program Name: use the „RIGHT” arrow to activate it.
Press the „UP” / „DOWN” button to select the desired channel and
press the „OK” button to confirm the desired channel.
- Setting End Time : HH/MM handling similarly, as setting the Date
- End Time: HH/MM display only, not adjustable