SOMMER MRL-7, User Manual

Page: 88 / 100

87
K-D Inspection, nominal values
Only available in terminal mode. Lists internal nominal values of the MRL-7 and is used for diagnostic
purposes.
K-E Inspection, start process
Only available in terminal mode. Performs a test of the internally generated voltages and analog inputs.
This test requires an adapter available as an accessory from SOMMER Messtechnik.
K-F Set factory default
Only available in terminal mode. Resets all parameters to their factory defaults.
K-G Temp. load factory default
Only available in terminal mode.
Temporarily sets all device parameters to their default values. When the MRL-7 is restarted or the
terminal menu closed and reopened again the previously set parameters are restored. This feature
may be used to list the default values as a reference.
K-H Relaunch program
The MRL-7 is restarted. Powering the device off and on again is equivalent.
K-I Replace program
The MRL-7 is set into a Boot Loader mode for three minutes to upload the firmware.