41
7.
Click
Finish
. Upon completion, the newly created station is displayed in the
Communication
section
of the Commander.
8.
Click
Connect
to open the connection with the data logger. If the connection was successful a green
icon is displayed at the top-right corner of the Commander window.
7.1.4
Terminal editor
The Commander software ships with an integrated terminal program. However, communication with
the MRL-7 can be performed with any terminal program.
Perform the following steps to connect to the MRL-7 using a terminal program:
1.
Connect the provided USB to RS-232 converter to your PC. If required, install the driver of the USB
to RS-232 converter.
2.
In your terminal editor select the COM port assigned to the USB/RS-2323 converter and adjust the
communication settings to the following values:
-
Baud rate
115200
-
Data bits
8
-
Parity
none
