25
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
6. Replacing a lost or broken control point
If the original control point is lost or broken, there are two possible
situations:
the lost or broken control point is the only control point for the product,
•
the lost or broken control point is not the only one which controls
•
the product.
6.1 Sole control point lost or broken
Contact the Somfy assistance service so they can provide guidance for
the replacement of the sole lost or broken control point.
6.2 One lost or broken control point amongst others
Find one of the control points linked to the product.
-
Follow the steps described in the section "Adding the Telis Soliris RTS"
-
according to the control point model.
Note: If, after having followed this operation, there is not a brief move-
ment (or a series of beeps) from the product, contact the Somfy assis-
tance service so they can provide guidance for the replacement.
7. Mounting the bracket
Somfy advises that the Telis Soliris RTS
is installed in close proximity to the
product to which it is linked, to avoid
it having to perform any unnecessary
searches.
The minimum distance which must be
kept between RTS enabled products is
30cm: (e.g. 30 cm between any RTS
control points and/or between any
control point and any motor).
Drill a 6 mm diameter hole.
-
Push in the plug (4).
-
Fix the bracket (3) with the screw (5).
-
Screw the mounting pin (2) on the
-
bracket (3).
Hook the Telis Soliris RTS (1) onto the
-
mounting pin (2).
Note: Do not attach the Telis Soliris RTS to a metal surface.
4
3
5
3
2
2
1
