21
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
5.6.1 Adding a Telis Soliris RTS
Bring the product to the midway
-
position.
-
Turn the original Telis over: the PROG
button (e) is located on the rear panel.
Press the PROG button (e) with the tip
-
of a pencil until the product moves brie-
fly (or a series of 3 beeps is emitted):
the programming function is activated
for approximately 2 minutes.
Take the new Telis Soliris RTS and turn
-
it over.
-
Press the PROG button (G) on the new
Telis Soliris RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
Soliris RTS is stored.
-
Press the Down button on the new Telis
Soliris RTS:
If the product is lowered, the Telis
-
Soliris RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original Telis must be deleted, go
-
to paragraph 5.6.2 "Deleting the origi-
nal Telis".
5.6.2 Deleting the original Telis
(optional)
Recommended: Only follow this proce-
dure if use of the original Telis is no
longer required.
Warning! Before deleting a Telis Soliris,
contact the Somfy assistance service
to check the compatibility of the control
point with the product.
e
G
