17
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
-
Press the PROG button (G) on the new
Telis Soliris RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
Soliris RTS is stored.
-
Press the Down button on the new Telis
Soliris RTS:
If the product is lowered, the Telis
-
Soliris RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original control point must be dele-
-
ted, go to paragraph 5.4.3 "Deleting an
original control point".
If the original control point is to be kept,
-
refit the front cover:
Insert the front cover on its brac-
-
ket, allowing the buttons to come
through their housings.
Press the front until it clicks, to fix
-
the front cover in its bracket.
5.4.3 Deleting an original control point
(optional)
Recommended: Only follow this proce-
dure if use of the original timer is no
longer required.
Wait 5 minutes.
-
Take the new Telis Soliris RTS and turn
-
it over to access the PROG button (G).
-
Press the PROG button (G) on the Telis
Soliris RTS with the tip of a pencil until
the product moves briefly (or a series of
3 beeps is emitted): the programming
function is activated for approximately
2 minutes.
G
G
