23
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
5.7 Telis 4 RTS/Telis 4 Soliris
RTS remote controls
The Telis 4 RTS (6a) and Telis 4 Soliris
RTS (6b) have 4 indicator lights.
Move close to the product to install the
Telis Soliris RTS.
5.7.1 Adding a Telis Soliris RTS
-
On the original Telis, select the indica-
tor light which controls the product only,
with button (f).
Bring the product to the midway
-
position.
Turn the original Telis over: the PROG
-
button (e) is located on the rear panel.
-
Press the PROG button (e) with the tip
of a pencil until the product moves brie-
fly (or a series of 3 beeps is emitted):
the programming function is activated
for approximately 2 minutes.
Take the new Telis Soliris RTS and turn
-
it over.
-
Press the PROG button (G) on the new
Telis Soliris RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
Soliris RTS is stored.
Press the Down button on the new Telis
-
Soliris RTS:
If the product is lowered, the Telis
-
Soliris RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original Telis must be deleted, go
-
to paragraph 5.7.2 "Deleting the origi-
nal Telis".
6a
6b
f
e
f
e
G
