14
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
Lever it, without using force, to
-
detach the mounting lugs from the
front cover.
-
Turn the front cover over: the
PROG button is located next to the
battery (b).
Caution! If after removing the front cover,
no PROG button is found, this means
that the control point is not compatible:
the Telis Soliris RTS cannot be linked to
the product.
5.3.2 Adding the Telis Soliris RTS
Switch the mains power supply back on
-
or reconnect the battery to the motor.
-
Press the PROG button (b) on the
original control point until the product
moves briefly (or a series of 3 beeps is
emitted): the programming function is
activated for approximately 2 minutes.
Take the new Telis Soliris RTS and turn
-
it over.
-
Press the PROG button (G) on the
Telis Soliris RTS briefly with the tip of
a pencil: the product will make another
brief movement (or emit a series of
8 beeps) to indicate that the new Telis
Soliris RTS is stored.
-
Press the Down button on the new Telis
Soliris RTS:
If the product is lowered, the Telis
-
Soliris RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
If the original control point must be dele-
-
ted, go to paragraph 5.3.3 "Deleting an
original control point".
b
b
G
14
