15
Copyright © 2008 Somfy SAS. All rights reserved.
Telis Soliris RTS
If the original control point is to be kept,
-
refit the front cover:
Insert the mounting lugs into their
-
notches on one side of the front
cover.
Press on the other side until it clicks,
-
to fix the front cover in its bracket.
5.3.3 Deleting an original control point
(optional)
Recommended: Only follow this proce-
dure if use of the original control point is
no longer required.
Wait 5 minutes.
-
-
Take the new Telis Soliris RTS and turn
it over to access the PROG button (G).
Press the PROG button (G) on the
-
new Telis Soliris RTS with the tip of a
pencil until the product moves briefly
(or a series of 3 beeps is emitted): the
programming function is activated for
approximately 2 minutes.
-
On the original control point, press the
PROG button (b) briefly: the product
will move briefly (or emit a series of
8 beeps) to indicate that the original
control point is deleted.
Press the Down button on the origi-
-
nal control point: the product does not
move.
-
Press the Down button on the new Telis
Soliris RTS:
If the product is lowered, the Telis
-
Soliris RTS is operational.
If the product does not move, contact
-
the Somfy assistance service.
G
b
