13
GB
2- Press the (
Prog.
) key on the Telis Composio RTS remote control
for 0.5 seconds. The corresponding product is again activated
(a brief movement or blinking) confirming the end of the
procedure.
Repeat steps 1 and 2 for every product to be assigned to the
group being created.
3- Once steps 1 and 2 have been completed for all of the products to be
included in the group, finish the procedure by pressing (
ok
).
4- Test pairing using the (
c
,
a
,
e
) keys. The product or products
in the group will activate if the procedure was successful, if not,
repeat steps 1 and 2. The group can be modified or deleted if
necessary.
5- Finish with (
ok
) to validate.
The blank box selected for creating the group becomes black.
T
IP
• Think about every day group use when creating them.
A mixture of different applications in the same group may turn out to be not very
handy in practice.
For example, in a group comprising both roller shutters and the blind on the
terrace, a down order will trigger the following result:
- the roller shutters will roll down = closed
- the blind on the terrace will roll down = open
CREATING A GROUP
5015237A-GB.qxd 25/01/07 14:52 Page 13
