15
GB
Deleting a group
To delete a group, select “
Delete group
” and confirm with (
i
)
or (
ok
).
From the matrix, select the group to be deleted and confirm with
(
i
) or (
ok
).
Delete all products from the group as follows:
All of the products in the group must be deleted individually, one after another.
1- Press the (
Prog.
) key on the local control corresponding to the
product to be deleted until brief product motion is observed (or
blinking for a light receiver): then you have two minutes left to
perform the next step.
2- Press the (
Prog.
) key on the Telis Composio RTS remote control for
0.5 seconds. The corresponding product is again activated (a
brief movement or blinking) confirming the end of the proce-
dure.
Repeat steps 1 and 2, if necessary, for all of the products to be deleted for the
group currently being modified.
3- Delete all of the group products before finishing the procedure by pressing
(
ok
).
4- Test pairing using the (
c
,
a
,
e
) keys.
None of the products should react any longer. Repeat steps 1 and
2 if necessary and re-test pairing until all of the products in the
group have indeed been deleted.
5- Finish with (
ok
) to validate.
The deleted group’s box becomes blank once again.
Only confirm with
(ok)
when none of the products react any more.
DELETING A GROUP
2s
2s
2s
Local Control Options
5015237A-GB.qxd 25/01/07 14:52 Page 15
