6
GB
Selecting a group
There are two different ways to select a group.
Selecting a group by name
Place the cursor on the group names at the bottom of the screen and use the (
n
) keys to scroll
the group names until the desired group is found.
The names that appear in this field are the names of the last groups
used. You can choose to display the last five groups used, the last ten
groups used or all groups. This setting can be modified from the
“
System
>
Settings
>
Size group list
” menu (refer to
“Settings”).
Selecting a group from the matrix
Select the desired group directly from the matrix using the (
m
) keys.
The black boxes correspond to groups that have already been
created; the blank boxes correspond to blank locations.
The corresponding group name is displayed at the bottom of the
screen.
Driving a group
After first selecting a group, all of the products in the group can be driven simultaneously:
Stop a
Up order
Down order
moving group
Garage door and gate opening and closing systems are driven in sequential mode using the (
e
) key: every
time you press the (
e
) key, the drive motor successively receives the up / stop / down / up / stop orders…
Garage door and gate opening and closing systems must not therefore be included in groups comprising other
kinds of products that use a conventional drive mode. A group should be created for each garage door or gate opening
and closing system. Garage doors and gates must always be operated when in sight of the user.
T
IP
• Setting up this function so that it only displays the last five groups used makes it
possible to run a quick search on the most used groups.
QUICK START GUIDE
5015237A-GB.qxd 25/01/07 14:52 Page 6
