14
GB
Modifying a group
To add a product to a group or delete one, select “Modify group” and
confirm with (
i
) or (
ok
).
From the matrix, select the group to modify and confirm with (
i
)
or (
ok
).
The group modification procedure is performed as follows:
1- Press the (
Prog.
) key on the local control corresponding to the
product to be added or deleted until brief product motion is
observed (or blinking for a light receiver): then you have two
minutes left to perform the next step.
2- Press the (
Prog.
) key on the Telis Composio RTS remote control
for 0.5 seconds. The corresponding product is again activated (a
brief movement or blinking) confirming the end of the
procedure.
3- Finish the procedure by pressing (
ok
).
4- Test pairing using the (
c
,
a
,
e
) keys.
The product should react if it has been added or no longer react if
it has been deleted from the group. If not, repeat steps 1 and 2.
5- Finish with (
ok
) to validate.
·
Repeat the procedure from the start (“
System
>
Groups
>
Pairing
>
Modify
group
” menu) as many times as there are modifications to make.
MODIFYING A GROUP
2s
2s
2s
Local Control Options
5015237A-GB.qxd 25/01/07 14:52 Page 14
