12
GB
We recommend pairing all carrier products with local control points and to set the end of travel stops for each
carrier product before using the Telis Composio RTS. Nevertheless, Telis Composio RTS can be used like any RTS
remote control to set motors into service (setting end of travel stops…).
The “
System
>
Groups
>
Pair
” (
k
) menu lets you add, modify and delete groups.
Creating a group
Select “
Create group
” and confirm with (
i
) or (
ok
).
Select an available location to create a new group (blank boxes) and
confirm with (
i
) or (
ok
).
Each new group can be named by entering a name in full or by
selecting one from a preset list of names (refer to “Customising the
matrix” for more information on how the data entry screen works).
Once you have finished entering the name, confirm with (
ok
).
The pairing procedure is performed as follows:
1- Press the (
Prog.
) key on the local control until the product moves
briefly (a light receiver blinks): then you have two minutes left to
perform the next step.
CREATING A GROUP
2s
2s
2s
Local Control Options
5015237A-GB.qxd 25/01/07 14:52 Page 12
