EN
4
Copyright © 2013-2016 Somfy SAS. All rights reserved
5. COMMISSIONING
Connect the power cable to the motor.
To ensure electrical safety, this Class III motor
must be powered by a «SELV» voltage source
(Safety Extra Low Voltage).
1) Slide the motor into the tube.
2) Fix the tube to the motor with self-tapping screws or
steel pop rivets depending on the dimension (L).
If necessary, screw the bracket interface on the motor
head.
1) Mount the motorized tube on the end bracket (c).
2) Mount the motorized tube on the motor bracket (d).
3.3. Motor/tube assembly
3.4. Mounting the motorized tube on the brackets
L
2. SAFETY
To avoid damaging the product:
1) Never immerse it in liquid!
2) Avoid impacts!
3) Never drill holes in it!
4) Do not drop it!
1
3
2
4
3. INSTALLATION
1) Fit the crown (a) and drive wheel (b) to the motor.
2) Measure the length (L) between the end of the drive
wheel and the head end.
Cut the tube to the required length.
Deburr the tube and remove the debris.
3.1. Motor preparation
3.2. Tube preparation
1
2
a
b
