SOMFY HOME MOTION Chronis io, User Manual

Page: 13 / 116

Copyright © 2013 Somfy SAS. All rights reserved.
Chronis io
11
EN
To change mode, move the mode selection cursor:
• Manual mode
• Automatic mode
• Simulated presence mode
7.1. Manual mode
The manual mode of the Chronis io is used to:
• send occasional orders to the associated end-product or end-products.
• deactivate automatic order programming.
In manual mode the current time is permanently displayed.
7.1.1.
button
- When the favourite position has been programmed and the end-product or end-products are
stopped, briefly press : the end-product or end-products move to the corresponding favourite
positions (my).
- When the end-product or end-products are moving, you can press briefly again to stop them.
7.1.2.
/ buttons
Configure the control mode corresponding to the type of end-product you want to control (see section
" Initial configuration "):
- In "
MODE STD : 1
":
• Brief press or long press: raise, switch on, open / lower, switch off, close.
- In "
MODE DIM : 2
":
• Brief press: fully switch on / switch off the lighting or the heating.
• Long press (> 0.5 s): increase / reduce the lighting or the heating.
- In "
MODE TILT1 : 3
":
• Brief press: tilt the slats of exterior venetian blinds or roller shutters with tiltable slats.
• Long press (> 0.5 s): Fully raise / lower exterior venetian blinds or roller shutters with adjustable
slats.
- In "
MODE TILT2 : 4
":
• Brief press: raise / lower the interior venetian blinds.
• Long press: tilt slats of interior venetian blinds.
7.2. Automatic mode
The automatic mode of the Chronis io is used to:
• send occasional orders to the associated end-product or end-products.
• automatically control the associated end-product or end-products by means of automatic orders
programmed according to the days of the week.
- Program the automatic orders for each day of the week (see section " Programming the days of
the week ").
7. oPERATIoN