SOMFY HOME MOTION Chronis io, User Manual

Page: 7 / 116

Copyright © 2013 Somfy SAS. All rights reserved.
Chronis io
5
EN
Only perform the procedure below if at least one of these parameters has to be modified, to display
the version of the software or to reset the Chronis io to its factory configuration.
Otherwise go to the section Adding or deleting a Chronis io at an end-product .
While you are configuring the control mode for the end-product and the control mode specific
to self-powered motors, you can use the , , buttons to test the response of the
end-product.
- Press the INSTAL button located on the back of the
Chronis io.
- The control mode for the end-product flashes.
- The parameters appear in the following order:
MODE
‹ ›
RADIO
‹ ›
SOLAR MOTOR
‹ ›
SOFT
‹ ›
RESET
‹ ›
EXIT
‹ ›
MODE
...
- To access another parameter, use the arrow keys
‹
or
›
:
• To change the control mode for the end-product :
- Select "
MODE
" and press OK: the current setting
flashes.
- Use
‹
or
›
to choose a setting and press OK.
- Choose "
SAVE
:
YES
" to save this setting (or "
SAVE :
NO
" by pressing
‹
or
›
if you do not want to save
the setting and to return to the previous step) and
press OK.
• To change the radio frame repetition setting :
- Select "
RADIO
" and press OK: the current setting
flashes.
- Use
‹
or
›
to choose a setting and press OK.
- Choose "
SAVE
:
YES
" to save this setting (or "
SAVE :
NO
" by pressing
‹
or
›
if you do not want to save
the setting and to return to the previous step) and
press OK.
• To control a self-powered motor :
- Select "
SOLAR MOTOR
" and press OK: the current
setting flashes.
- Choose "
SOLAR MOTOR : YES
" by pressing
‹
or
›
and
press OK.
- Choose "
SAVE
:
YES
" to save this setting (or "
SAVE :
NO
" by pressing
‹
or
›
if you do not want to save
the setting and to return to the previous step) and
press OK.
• To display the software version of the Chronis io:
- Select "
SOFT
".
• To reset the Chronis io to its factory configuration :
The end-products are still associated with the
Chronis io.
- Select "
RESET
"
and press OK.
- Choose "
RESET : YES
" to delete the settings you have
made (or "
RESET : NO
" by pressing
‹
or
›
to keep the
settings) and press OK.
- Repeat Chronis io commissioning in full.
• To terminate the procedure :
- Select "
EXIT
" and press OK: the Chronis io exits the
initial configuration procedure.