SOMFY HOME MOTION Chronis io, User Manual

Page: 8 / 116

Copyright © 2013 Somfy SAS. All rights reserved.
Chronis io
6
EN
5.3. Adding or deleting a Chronis io at an end-product
The same procedure is used to add or delete a
Chronis io.
1) Press (≈ 2 s) the PROG button on the individual io control
point that is already associated until the end-product
moves back and forth: programming mode is activated
for 10 minutes.
2) Briefly press the PROG button on the Chronis io: the
end-product moves back and forth, and the Chronis io
is added or deleted.
- Repeat the procedure to add or delete the Chronis io at
other end-products.
5.4. Initial setting of the date and time parameters
The first time you select automatic or simulated presence mode (cursor on or ), the date
and time setting function is activated directly: "
SET
" (Set) and "
YEAR
" (Year) are displayed on the screen,
with the year flashing (this is the first parameter to be set)
.
To change these parameters later, see section " Modifying the date and time parameters ".
The parameters appear in the following order:
1) The current year "
YEAR
".
2) The number of the current month "
MONTH
".
3) The number of the current day "
DAY
".
4) The current hour "
HOUR
".
5) The current minutes "
MINUT
".
6) The automatic time change between summer time and
winter time "
AUTO TIME SET
"
*
.
7) The hour at twilight in midsummer "
JUNE
"
**
.
8) The number of minutes at twilight in midsummer "
JUNE
"
**
.
9) The hour at twilight in midwinter "
DEC
"**.
10) The number of minutes at twilight in midwinter "
DEC
"
**
.
The twilight times must be set between 6 am and
11 pm.
You can press the back button
to return to the
previous step.
11) The screen displays "
SAVE
:
YES
"
. Click OK to terminate
and save the parameter settings. The Chronis io returns
to the mode selected using the cursor.
Choose "
SAVE : NO
" and press OK to restart the
procedure for setting the date and time parameters
from the beginning.
1)
2)
0,5 s.
2 s .
SET
SET
SET SET
SET
SET
SET
SET
SET
SET
1)
3)
5) 6)
7)
9)
11)
2)
4)
8)
10)

On each step, the parameter to be set flashes.
- To modify the parameter, press
‹
or
›
(you can press and hold down a button to scroll through
the characters more quickly).
- To confirm a parameter and move on to the next, press OK.