![background image](http://html1.mh-extra.com/html/somfy/dc-rts-receiver/dc-rts-receiver_operating-and-installation-manual_1318142008.webp)
7
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 05/2008
C - ADJUSTING THE BLIND
End limits are operated by the motor and its accessories and not by the DC RTS Receiver.
To use the DC RTS Receiver the product must be installed, connected and linked to a
remote control. The mode can be selected (Venetian or roller) as well as the motor rotation
direction. With this, the product is completely operational and remains open to numerous
other features (programming the raising/lowering duration, setting a favorite position, using
a sun sensor, etc…)
1) After connecting the DC RTS Receiver, switch on the power. The blind moves up and
down.
2) Getting started:
Two methods can be used to pair the DC RTS Receiver:
Using the receiver button to start settings :
Select the DC RTS Receiver you want to adjust while keeping other DC RTS Receivers
switched on (in case where several DC RTS Receivers are plugged).
Using the remote control to start settings :
When controlling through a remote control, all DC RTS Receiver are adjusted at the same
time if several DC RTS Receivers are connected.
Setting through the DC RTS Receiver:
Pairing:
Press the programming button on the RTS
module for approximately 2 seconds.
The blind moves up and down.
Saving:
Briefly press the programming button on the
remote control.
The blind moves up and down.
The remote control is permanently saved.
Enter readjustment mode:
To enter readjustment mode, simulta-
neously press the Up and Down buttons for
approximately 5 seconds until blind moves
up and down.
Settings:
Refer to steps:
C3a: Choosing the type of blind :
C3b: Motor rotation direction:
C3c: Orientation using the dial:
C3d: Sun sensor operation:
C3e: Duration of raising and lowering of
the blind
Confirm settings:
To confirm settings, press the My button for
approximately 5 seconds
until the blind
moves up and down
twice
.
2 X
C3a C3b C3c C3d C3e