9
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 05/2008
C.3.c) Tilting using the Modulis Scroll wheel:
Use the scroll wheel to verify the slats tilting.
If the direction is incorrect, press the Up and
Down buttons for approximately 2 seconds
until the blind moves up and down. The
Scroll wheel operational position has been
inverted.
This operation can be repeated several
times.
The operational position is inverted every
time the Up and Down buttons are pressed
for approximately 2 seconds.
Note: The slat tilting behaviour is indepen-
dent of the motor rotation direction.
C.3.d) Sun sensor operation:
The operational direction is set by default
for a motor installed at the top of the blind.
The operational direction can be pro-
grammed for a product where the motor is
installed at the bottom of the blind.
To modify the direction:
Press the My and Up buttons for approxi-
mately 2 seconds until the blind moves up
and down.
Press the Down button for approximately 2
seconds until the blind moves up and down
to set the DC RTS Receiver in inverted
sensor mode (in case motor is at the bottom
of the blind).
Press the Up button for approximately 2
seconds until the blind moves up and down
to set the DC RTS Receiver in normal
sensor mode (in case motor is at the top of
the blind).
Press the My button for approximately 2
seconds until the blind moves up and down
to confirm the sensor mode selection .