14
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 05/2008
E READJUSTING THE BLIND
Entering readjustment mode:
To enter readjustment mode, simultaneously
press the up and down buttons for approxi-
mately 5 seconds until the blind moves up
and down.
Settings:
Refer to steps:
C3a: Choosing the type of blind:
C3b: Motor rotation direction:
C3c: Orientation using the dial:
C3d: Sun sensor operation:
C3e: Duration of raising and lowering of
the blind
Confirming settings:
To confirm settings, press the My button for
approximately 5 seconds
until the blind
moves up and down
twice.
F ADDING AND DELETING
1) Adding or deleting a transmitter or a
sensor.
Press the programming button on the
RTS module or the transmitter A until the
blind moves up and down. Then press the
programming button on transmitter B. It
is either saved if the transmitter is new or
deleted if the transmitter is recognized.
2) Deleting all transmitters and sensors.
Press the programming button on the RTS
module for approximately 7 seconds. The
blind moves up and down twice:
First time for approximately 2 seconds.
Second time for approximately 7 seconds.
All transmitters have been deleted.
3) Back to factory mode
Press the programming button on the RTS
module for approximately 12 seconds. The
blind moves up and down three times:
First time for approximately 2 seconds.
Second time for approximately 7 seconds.
Third time for approximately 12 seconds.
All transmitters and sensors are deleted, up
and down motion durations are deleted.
The product settings are back to default
factory configuration.
C3a C3b C3c C3d C3e
2 X
A
B
2 X
3 X