8
Copyright © 2008 Somfy SAS. All rights reserved - V0 - 05/2008
Setting through the remote control:
Pairing:
Briefly press the Up and Down buttons on
the remote control.
The blind moves up and down.
The remote control is temporarily saved.
Settings:
Refer to steps:
C3a: Choosing the type of blind :
C3b: Motor rotation direction :
C3c: Orientation using the dial :
C3d: Sun sensor operation :
C3e: Duration of raising and lowering of the
blind
Saving:
Briefly press the programming button on
the remote control. The blind moves up and
down.
The remote control is permanently saved.
C.3) Adjusting or readjusting the blind:
C.3.a) Choosing the type of mode:
To skip from one mode to the other, press
the My and Down buttons for approximately
2 seconds until the blind moves up and
down.
The DC RTS Receiver in roller mode :
The UP and Down movement is without
stop at the down end limit.
The DC RTS Receiver in Venetian mode :
During the Up and Down movement, there
is a stop at the down end limit.
C.3.b) Motor rotation direction:
Press the Up or Down button to verify the
rotation direction.
If the direction is incorrect, press the My
button for approximately 2 seconds until the
blind moves up and down.
Verify the rotation direction using the Up
and Down buttons.
This operation can be repeated several
times.
The direction is inverted every time the My
button is pressed for 2 seconds.
C3a C3b C3c C3d C3e